Rustins Masonry Paint - White 500Ml

Coverage depends on the surface and application method, but typically 500ml will cover approximately 5-7 square meters with one coat.

No, this paint is specifically designed for masonry surfaces like brick, cement, and stone.

You can apply the paint with a brush, roller, or spray. Brushes are good for detail work, rollers for larger areas, and spray for speed and a smooth finish.

Priming is recommended, particularly on porous or previously unpainted surfaces, to improve adhesion and ensure a uniform finish.

Two coats are generally recommended for optimal coverage and durability.

The paint is quick-drying, typically touch-dry in a few hours. Allow a longer time for full curing, as stated on the product label.

Yes, this paint is suitable for both interior and exterior use.

Clean tools immediately after use with water.

Ensure the surface is properly prepared, clean, and free of any loose particles or existing coatings. Consider using a primer.

This could be due to applying the paint too thickly, or to poor surface preparation. Ensure the surface is clean and dry. Apply thin, even coats, and allow sufficient drying time between coats.

Ensure thorough stirring of the paint before application. Apply two even coats, and maintain a wet edge while painting to prevent lap marks.