Rustins Quick Dry Red Oxide Metal Primer - 250ml - Red

The coverage is approximately 12-15m² per litre.

It takes approximately 30 minutes to dry to the touch, depending on temperature and humidity.

Yes, Rustins Quick Dry Red Oxide Metal Primer can be used on both interior and exterior metal surfaces.

Yes, it is essential to apply an undercoat and then a topcoat of paint over the primer for complete protection and the desired finish.

Clean brushes with a mild detergent solution or white spirit.

The recoat time is approximately 4 hours.

It can be used on all bare metal surfaces, such as gates, railings, and automotive parts.

Store in a cool, dry place, away from direct sunlight, and keep the container tightly sealed when not in use.

Ensure adequate ventilation and check the temperature and humidity levels. High humidity can slow drying times.

Ensure the surface is thoroughly cleaned and free of any contaminants. Lightly sand the surface for better adhesion.

Use a high-quality brush and apply the primer evenly. Apply thin, even coats to minimize brush marks.