Dulux Trade Quick Dry Satinwood Tinted Colour Match - 1L

No, this product is specifically designed for interior use only and is not suitable for exterior applications.

The drying time is approximately 6 hours, but this can vary depending on temperature and humidity levels. Recoating is possible after a minimum of 4 hours.

It is suitable for interior wood, metal, and MDF surfaces.

After use, remove as much excess paint as possible from your tools and then clean them thoroughly with water.

Thinning is not usually necessary. However, if required, you can add up to 1 part clean water to 20 parts paint.

The surface coverage is approximately 12 square meters per liter, applied at the recommended thickness.

Please dispose of leftover paint responsibly. You can ask your stockist about recycling options for paint containers. Visit duluxtrade.co.uk/pp for more information on sustainability.

No, this product is tinted to order and therefore cannot be returned or exchanged.

Ensure the paint is thoroughly stirred. Use a good quality synthetic brush designed for water-based paints. Apply paint evenly and avoid overworking it. Ensure the surface is smooth and properly prepared.

Verify that the surface is clean, dry, and free from dust, grease, or flaking paint. Ensure appropriate primers have been used, especially on new or previously treated surfaces.

Drying times are affected by temperature and humidity. Ensure application is in a well-ventilated area and within the recommended temperature range. Avoid application in very humid or cold conditions.

Tinted colours are mixed to order. For best results, ensure the correct colour base and tinting formula were used. As tinted products cannot be returned, always test a small area if unsure.