Shark PowerDetect Robot Vacuum & Mop - White

The self-emptying dustbin on the base has a capacity of up to 60 days. The frequency of emptying depends on factors like pet hair, floor type, and how often the robot cleans. The app will notify you when it's full.

The robot's water tank is automatically refilled from the base, which holds enough water for up to 30 days of mopping. You will need to manually refill the base's water reservoir once it's depleted, approximately every 30 days depending on usage.

Yes, thanks to its 3D 360° LiDAR vision mapping, the Shark PowerDetect Robot is designed to navigate and clean various floor types, including dark-colored surfaces, without issues typically associated with older sensor technologies.

Absolutely. It's ideal for pet owners due to its strong suction for pet hair, effective anti-allergen complete seal that captures 99.9% of dust and allergens, and built-in anti-odour technology to keep your home smelling fresh.

After the robot completes its initial mapping of your home, you can use the SharkClean app to customize cleaning. Within the map view, you can draw 'no-go' zones to restrict access to certain areas or define specific rooms or zones for targeted cleaning.

The washable mopping pads are designed for repeated use and are automatically cleaned by the base. Replace them when they show significant wear, tear, or loss of cleaning effectiveness. The anti-odour cartridge typically needs replacement every 3-6 months, depending on usage and your home environment. You can purchase replacements from Shark.

The robot is equipped with NeverStuck Technology to lift and lower itself over obstacles, including carpets. However, it will not mop carpets. When mopping, the robot is designed to avoid carpeted areas if they are detected. Ensure your map is accurate for optimal performance.

Ensure the power cord is securely plugged into the self-emptying base and the wall outlet. Check that the robot is properly seated on the charging contacts of the base. If the issue persists, try a different wall outlet.

Clear any large obstacles or loose cords from the cleaning path. Ensure the home map in the SharkClean app is accurate. Clean the robot's sensors and wheels to ensure they are free from dust and debris. Verify that the NeverStuck Technology isn't impeded by excessive carpet thickness or very high thresholds.

Check the dustbin in the base for fullness and empty if necessary. Inspect the brush roll and side brushes for tangled hair or blockages and clean them. Ensure the suction inlet is clear and not obstructed. Verify the robot's filter is clean; clean or replace as needed.

Ensure the water tank on the base is filled. Verify the mopping pads are securely attached and clean. Check the water nozzles on the robot for clogs and clear them if necessary. Make sure the correct cleaning mode is selected in the app.

Ensure your robot is within range of your Wi-Fi router. Restart your Wi-Fi router, then restart the SharkClean app. If problems persist, try restarting the robot (refer to its manual for specific restart instructions) and re-attempt pairing via the app.

Check if the base's dustbin is full and needs to be emptied or if the bag needs replacement. Ensure the robot is properly docked to create a secure seal for debris transfer. Clear any blockages in the transfer path between the robot and the base.