Shark PowerDetect Robot Vacuum & Mop - Black - RV2800YEUK
Shark’s best cleaning Robot Vacuum & Mop with NeverStuck Technology. This 2-in-1 Robot Vacuum and ...Shark’s best cleaning Robot Vacuum & Mop with NeverStuck Technology. This 2-in-1 Robot Vacuum and Mop deep cleans all floor types with intelligent cleaning technologies, then returns to the NeverTouch base to automatically empty dirt and debris, and refill with clean water, so it’s always ready for the next run. Enjoy up to 30 days of self-empty convenience with the NeverTouch base.
Self-Refills: When the robot returns to the base, the base automatically refills the robot’s tank with clean water. The tank holds 1.7L of water for up to 4000 sq. ft. of mopping coverage – that’s enough clean water to refill the robot for up to 30 days.
Self-Empties: After every vacuuming run, the robot returns to the base and empties its on-board dust bin into the bagless base. The base holds dirt and debris for up to 30 days, so your robot can stay on top of daily cleaning, without the need for constant emptying.
Pad Dry: The base automatically dries the mop pad when your robot returns after a mopping session. Seamlessly switch between wet and dry cleaning – the robot automatically picks up and drops off the mopping pad at the base, hands-free.
5 deep-cleaning technologies: Dirt Detect, Edge Detect, Floor Detect, Stain Detect and Wet Edge Detect react to your home and optimise your clean.
NeverStuck Technology: Actively lifts and lowers to manoeuvre over obstacles, across thresholds, and easily avoid getting stuck, cleaning more of your home*. In Vacuuming + Mopping mode, the robot also lifts up to prevent wet carpet messes, keeping the wet mop pad off your carpets and rugs.
*Based on internal stuck protocol, vs Shark RV750UK.
Anti-Allergen Complete Seal: The base traps 99.9% of dust, dander & pet allergens (Based on IEC standard 62885-2 CI. 5.14 at 0.3 to 10 microns.) Anti-Odour Technology: Guards against bad smells inside the base for a fresher smelling home.
Perfect for homes with pets: Anti Hair Wrap helps to prevent hair from wrapping around the self-cleaning brush-roll.
Precision home mapping: 360° LiDAR vision quickly and accurately maps every inch of your home.
Up to 110 minutes run-time (In low suction mode on hard floors.)
Customise your clean in the SharkClean app: Easy scheduling, Room Select, setting carpet zones, and more.
Compatible with Alexa and Hey Google.
Shark PowerDetect RV2800ZEUK Pro Robot Vacuum Cleaner & Mop [Scuffs/No Pads]Free delivery in 1–3 days£599.79Visit shop →
Shark PowerDetect RV2800ZEUK Pro Robot Vacuum Cleaner & Mop (Missing Items/Used)Free delivery in 1–3 days£599.79Visit shop →
Product Information
Full details
The Shark PowerDetect 2-in-1 Robot Vacuum and Mop is designed for homeowners seeking a truly hands-free, comprehensive cleaning solution, excelling at deep cleaning all floor types with intelligent technologies. Its key win is the NeverTouch base, offering up to 30 days of automated self-emptying and water refilling, drastically reducing maintenance. Be aware that initial setup and mapping may require some user interaction for optimal performance.
All features
Colour
Black
Series
PowerDetect
Model Part Number
RV2800YEUK
Brand
Shark
Extended Product Information
FAQs
How often do I need to empty the robot's dustbin or refill the water?
The NeverTouch base automatically empties the robot's dustbin and refills its water tank, providing up to 30 days of hands-free convenience for both functions before needing your intervention.
Can the robot vacuum and mop at the same time?
Yes, the Shark PowerDetect is a 2-in-1 system that can vacuum and mop in the same run. It seamlessly switches between modes and automatically picks up/drops off the mopping pad at the base.
Is this robot suitable for homes with pets?
Absolutely. It features powerful suction, Anti Hair Wrap technology to prevent hair tangles, and an Anti-Allergen Complete Seal in the base that traps up to 99.9% of dust, allergens, and irritants, making it perfect for homes with pets and allergy sufferers.
How does it handle carpets when mopping?
The robot intelligently detects carpets and rugs. In Vacuuming + Mopping mode, it automatically lifts the wet mop pad to prevent wetting your carpets, ensuring only hard floors are mopped.
What is the typical run-time?
The robot offers up to 110 minutes of run-time on a single charge in low suction mode on hard floors. It will return to its base to recharge and resume cleaning where it left off if needed.
How accurate is the home mapping and navigation?
The robot uses 360° LiDAR vision for precision home mapping, quickly and accurately mapping every inch of your home. This allows it to clean methodically, detect, and avoid objects in its path, adapting to changes in your home environment.
Can I control the robot from my phone?
Yes, you can customize your clean using the SharkClean app. This allows for easy scheduling, Room Select, setting carpet zones, no-go zones, and more. It is also compatible with Alexa and Hey Google for voice control.
Troubleshooting
Robot not cleaning thoroughly or missing spots.
Ensure the NeverTouch base is properly positioned and filled with clean water. Check the robot's dustbin and mop pad for blockages. Utilize `Dirt Detect` in the SharkClean app for targeted cleaning of high-traffic areas, or ensure your home map is accurate.
Mop function is not working or leaves streaks.
Verify the clean water tank in the NeverTouch base is full and the robot's internal water tank is refilled. Ensure the mop pad is correctly attached and not overly soiled, rinse it if necessary. For tough stains, use `Stain Mode` for concentrated cleaning.
Robot getting stuck frequently or navigating erratically.
Leverage the `Precision home mapping` in the SharkClean app to ensure your home layout is accurately mapped. Clear major obstacles and loose items (e.g., cables, small toys) before a cleaning run. While `NeverStuck Technology` helps with thresholds, a clear path is always best for optimal efficiency.
Pros and Cons
Pros
Minimal Maintenance: Up to 30 days of self-emptying and self-refilling convenience from the NeverTouch base.
Intelligent Cleaning: Features like `Dirt Detect`, `Edge Detect`, and `Floor Detect` ensure thorough cleaning tailored to specific needs.
Effective 2-in-1 Functionality: Seamlessly transitions between vacuuming and mopping, with automatic mop pad lifting for carpets.
Advanced Navigation: LiDAR mapping and `NeverStuck Technology` ensure efficient, comprehensive coverage and obstacle avoidance.
Pet & Allergy Friendly: Powerful suction, Anti Hair Wrap, and Anti-Allergen Complete Seal make it excellent for homes with pets and allergy sufferers.
Customizable Cleaning: Full control and scheduling via the SharkClean app, compatible with Alexa and Hey Google.
Cons
Initial Setup: Requires some time for initial mapping and zone setup via the app.
Water Tank Capacity for Large Homes: While large, very extensive mopping areas might still require manual refilling before 30 days.
Base Footprint: The NeverTouch base requires a dedicated space for its size, which includes the dustbin and water tanks.
Setup, Compatibility & Care
Setup:
Unpack and Place Base: Unbox the robot and the NeverTouch base. Place the base in an open area with good Wi-Fi signal, clear of obstacles and walls, allowing the robot ample space to dock.
Fill Water Tank: Fill the clean water tank in the NeverTouch base with appropriate cleaning solution or water (refer to the user manual for specifics).
Charge Robot: Place the robot onto the charging dock. Ensure it is fully charged before its first mapping or cleaning run.
Download SharkClean App: Download the SharkClean app on your smartphone. Follow the in-app instructions to connect the robot to your home Wi-Fi network and begin the initial home mapping process.
First Map: Allow the robot to complete an initial mapping run without cleaning. This creates a detailed map of your home for efficient future cleaning.
Compatibility:
Smart Home Integration: The Shark PowerDetect robot is compatible with voice assistants such as Alexa and Hey Google. You can issue voice commands to start, stop, or pause cleaning sessions.
SharkClean App: Full control over cleaning schedules, room selection, no-go zones, carpet zones, and power modes is available through the SharkClean app.
Care:
NeverTouch Base Maintenance: The base holds dirt for up to 30 days and water for up to 30 days of refills. Periodically check the dirt collection bin in the base and empty it as needed. Ensure the clean water tank is refilled.
Mop Pad Care: The base automatically dries the mop pad. However, for optimal performance and hygiene, the mop pad should be removed and rinsed or washed regularly according to manual instructions.
Brush-roll Cleaning: While the Anti Hair Wrap feature minimizes tangles, occasionally inspect the brush-roll for any wrapped hair or debris and clear it manually if necessary.
Sensor Cleaning: Regularly wipe the robot's sensors (LIDAR, cliff sensors, etc.) with a clean, dry cloth to ensure proper navigation and obstacle detection.
Filter Maintenance: Periodically clean or replace the filter in the robot's dustbin as recommended in the user manual to maintain optimal suction power.