KVM Switch HDMI 4K60, USB 3.0 & Audio, 4 Port

The KVM switch supports resolutions up to 4K Ultra HD (4096 x 2160 pixels) at a 60Hz refresh rate with 4:4:4 chroma subsampling and HDR.

Yes, you will need HDMI cables and USB 3.0 Type-B to USB Type-A cables for each computer you connect to the KVM switch. Using certified HDMI 2.0 cables is recommended for optimal performance.

The KVM switch has USB Type-A ports for peripherals. If your device uses USB-C, you will need a USB-C to USB-A adapter or hub to connect it.

You can switch between the connected computers using the physical push buttons located on the front panel of the KVM switch, or by using pre-defined keyboard hotkeys.

No, the audio output ports (for headphones, speakers, and microphone) are connected via a built-in USB converter and are independent of the HDMI video signal.

This Lindy product comes with a 2-year warranty.

Yes, you can connect webcams and other USB devices like printers, scanners, or external hard drives to the two USB 3.0 Type-A ports on the front panel.

Verify all HDMI cable connections are secure between the PCs, KVM switch, and monitor. Ensure the correct input source is selected on the monitor. Check that the KVM is powered on and the LED for the selected PC is lit.

Ensure the keyboard and mouse are connected to the correct console USB ports on the KVM. Try reconnecting them. Check the USB 3.0 Type-B connection from the PC to the KVM. Test the keyboard and mouse directly connected to the PC to rule out peripheral issues.

Confirm that the HDMI cables used are rated for 18Gbps (HDMI 2.0) and support 4K@60Hz. Ensure the resolution and refresh rate are correctly configured in the PC's display settings and are supported by the monitor. Check for any obstructions or damage to the cables.

Verify that the USB 3.0 Type-B cable is properly connected between the PC and the KVM switch. Ensure the USB 3.0 device is connected to one of the front panel USB 3.0 Type-A ports. Try a different USB 3.0 port or a different USB 3.0 device to diagnose.

Confirm that headphones/speakers and microphone are plugged into the correct 3.5mm jacks. Check that the audio output device is selected correctly in the PC's sound settings and that the KVM's audio mute button is not activated.