8x8 HDMI 4K60 Matrix - Lindy - Black

The Lindy 8x8 HDMI 4K60 Matrix supports a bandwidth of 18 Gbit/s, which is necessary for transmitting 4K 60Hz signals with HDR.

The matrix supports HDMI 2.0b. While it can handle signals from older HDMI versions, its full capabilities (like 4K 60Hz HDR) are realized with HDMI 2.0b compliant sources and displays.

The downscale function allows each output port to convert a 4K signal (3840x2160) down to Full HD (1920x1080). This is useful for connecting to older displays that do not support 4K resolution.

You can get audio pass-through via HDMI. Additionally, there are dedicated Coax (digital) and 3.5mm (analog stereo) audio outputs for connecting external sound systems or amplifiers.

The Lindy 8x8 HDMI 4K60 Matrix comes with a 2-year warranty.

Yes, the Audio Return Channel (ARC) feature allows audio to be sent from a connected TV back to an audio system or soundbar over the same HDMI cable, simplifying audio setup.

Yes, the matrix features an RJ-45 port for network control and includes an intuitive Web GUI, allowing for remote management and switching.

Verify all HDMI cables are securely connected to both sources and displays. Ensure the correct input source is selected on the matrix and the corresponding output is active. Check that the source device is powered on and outputting a signal. Try shorter, certified HDMI cables if signal degradation is suspected.

Check EDID settings via the Web GUI or RS-232. Ensure the connected display's native resolution is correctly communicated to the matrix. If using the downscale function, verify it's configured appropriately for Full HD output. Ensure HDR settings are consistent between source and display.

Confirm that the HDMI source device is configured to output audio separately from the video stream. Verify that the Coax or 3.5mm audio outputs are enabled in the matrix settings and that the connected audio system is functioning correctly. Check that the HDMI audio pass-through is not inadvertently disabled.

Ensure the remote control has functional batteries. Check that the IR receiver on the front of the matrix is not obstructed. If using the IR extension, ensure it is properly connected and positioned. Try using the front panel buttons to confirm the matrix unit itself is responsive.

Ensure the DC power adapter is securely connected to both the matrix and a functional power outlet. Check the input current requirement (5A) and ensure the power outlet can supply adequate power. Try a different power outlet if available.