Rustins Quick Dry Textured Step and Tile Paint - Black

This paint is suitable for use on tiles, concrete, and brick surfaces.

Yes, this paint is weather-resistant and suitable for both interior and exterior applications.

It is recommended to apply two coats for optimal performance and durability.

The paint is quick-drying. Refer to the product label for specific drying times, typically around 4 hours between coats.

Coverage is approximately 14m² per litre per coat, depending on surface absorbency, so a 500ml can covers roughly 7m² per coat.

Clean spills immediately with water. Wash painted surfaces with a mild detergent and water as needed. Avoid abrasive cleaners.

It is independently tested and rated as low slip potential according to BS7976, Part 2, 2002.

Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand glossy surfaces to improve adhesion. Apply a second coat.

Ensure the paint is fully dry and cured according to the manufacturer's instructions. Apply the paint evenly and avoid applying too thinly.

Ensure the paint is thoroughly mixed before and during application. Apply an even coat and avoid over-brushing. Apply a second coat.