Rustins Quick Dry Step & Tile Gloss Paint - Red 250ml

Rustins Quick Dry Step & Tile Paint is suitable for tiles, concrete, and brick surfaces. However, it is not recommended for glazed or quarry tiles.

Each 250ml tin covers approximately 3.5m² per coat, depending on the surface absorbency.

For interior surfaces, one coat may be sufficient. Exterior surfaces generally require two coats.

Allow 6-8 hours for recoating.

Apply the paint with a brush for best results.

Yes, this paint is designed to be durable and is suitable for high-traffic areas.

Clean the surface with mild soap and water. Avoid abrasive cleaners.

Ensure the surface has been properly prepared. Key the surface and remove any wax or loose paint before application.

Ensure thorough mixing of the paint before application. Apply an even coat to the surface.

Ensure adequate ventilation during the drying process. Check the room temperature and humidity levels.