Rustins Quick Dry Textured Step & Tile Paint - Red

This paint is suitable for use on concrete, bricks, and tiles, but it is not suitable for glazed or quarry tiles.

Two coats are recommended for optimal performance and durability.

It is touch-dry in 30 minutes and recoatable in 4 hours.

Coverage is up to 14m² per litre.

Yes, this paint is suitable for both interior and exterior use.

Clean the surface with mild soap and water. Avoid abrasive cleaners or solvents.

No, it is a low-odour, water-based formula.

Yes, it is rated as 'low slip risk potential' according to BS7976, Part 2, 2002.

Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand glossy surfaces to improve adhesion.

Ensure adequate ventilation. Apply the paint in thin, even coats, and avoid applying in excessively humid conditions.

Ensure that the paint is applied according to the manufacturer's instructions, and allow sufficient drying time for the textured agents to take effect.

Ensure proper surface preparation. Remove any loose paint or residue before re-applying. Apply a primer if necessary.