Kenable Microphone Lead - Red - 5m

This lead is suitable for most microphones that use a standard 3-pin XLR connection, including dynamic microphones and condenser microphones (provided your audio interface or mixer supplies phantom power).

It means the cable contains two main signal conductors plus a braided or foil shield around them. This shield acts as a barrier against electromagnetic interference, reducing unwanted noise and hum.

No, this cable is designed for mono signals typically used by microphones. It has standard 1:1 pin connections for a single audio channel.

The connectors are described as 'All Metal Robust ends for reliability', indicating they are constructed from metal for increased durability compared to plastic connectors.

The cable has a diameter of 6mm, offering a balance between flexibility and a substantial feel.

While the cable is designed for signal integrity, 5 meters is a moderate length. For significantly longer runs (e.g., over 10-15 meters), you might consider higher-quality or specialized cables to minimize potential signal degradation, though this cable's screening offers good protection.

Check that both the male XLR plug and female XLR socket are fully inserted. Inspect the cable and connectors for any visible damage. Test with a different microphone and/or input to rule out other equipment issues. Ensure the correct input channel is selected and unmuted on your mixer or interface.

Ensure the cable is not positioned too close to power cables or transformer-based equipment. Try a different power outlet for your audio equipment. Check if the noise source is external to the cable itself (e.g., ground loop issues with other connected gear).

Inspect the locking mechanism on the female XLR connector for damage or debris. Ensure the male XLR plug is fully inserted and the locking collar has engaged properly. If the connector is damaged, the cable may need replacement.