Kenable Microphone Lead - Black

The two-core screening is designed to block electromagnetic interference (EMI) and radio frequency interference (RFI) from external sources like power supplies, lighting rigs, and other audio equipment, ensuring a cleaner audio signal.

While it can physically connect, this cable is specifically designed as a microphone cable with balanced XLR connectors. For instruments like guitars or keyboards, you would typically use unbalanced TS (1/4 inch jack) cables, or balanced TRS cables if the instrument supports it and the destination equipment has balanced inputs.

Yes, it can be used for line-level signals if both the source and destination devices have balanced XLR inputs. However, its primary design and optimal performance are for microphone-level signals.

This refers to the standard wiring for balanced XLR audio cables. Pin 1 is ground/shield, Pin 2 is the positive signal (hot), and Pin 3 is the negative signal (cold). A 1:1 connection ensures these signals are passed directly between the connectors.

The all-metal construction of the XLR connector housings provides increased durability and resistance to physical stress compared to plastic connectors, making them more reliable for frequent use and transportation.

Yes, this cable is designed to pass phantom power. Ensure that phantom power is enabled on your audio interface or mixer and that the cable connections are secure.

Ensure both the male and female XLR connectors are fully seated in their respective ports. Check that the audio source (microphone) is functional and that the connected equipment (mixer, interface) is powered on and configured correctly. Inspect the cable for any visible damage.

Verify that the connected equipment is properly grounded. Ensure the cable is not routed too closely to power cables or other sources of electrical interference. Test with a different microphone and audio interface to isolate the source of the noise.

Confirm that phantom power is enabled on your mixer or audio interface. Check that the XLR connections are secure and that the cable's conductors are not damaged, as this could impede phantom power transmission.