Kenable XLR Microphone Cable - Black

This cable is suitable for most types of microphones that use a standard 3-pin XLR connection, including dynamic and condenser microphones.

No, this is a standard mono microphone cable designed for single-channel audio signals. It is not suitable for stereo connections.

'Screened' refers to the shielding around the internal conductors, which helps to block electromagnetic interference from external sources, leading to a cleaner audio signal.

While it uses XLR connectors, this cable is designed for audio signals. DMX lighting control uses a different pinout and signal protocol and may not be compatible or reliable with this audio cable.

Please refer to the retailer's specific warranty policy for this product, as warranty information can vary.

No, this cable is designed to connect one microphone to one audio input device. It cannot be used to link two microphones together.

Ensure the cable is fully plugged into both the microphone and the audio device. Check that the correct input on the audio device is selected and that the device is powered on and its volume is up. Test with a different cable or microphone to isolate the issue.

Verify that the cable's screening is intact and that it's not damaged. Ensure the cable is routed away from power cables or high-power electrical equipment. Try a different cable to see if the interference persists. Ensure the equipment connected is properly grounded.

Check the XLR connectors for dirt or damage. Gently clean the connector pins. Ensure the cable is not being stepped on or excessively stressed, as this can damage internal connections.