kenable XLR Microphone Cable - Black

The screening acts as a shield to protect the audio signal from electromagnetic interference (EMI) and radio frequency interference (RFI) generated by nearby electronic equipment and power supplies, ensuring a cleaner audio output.

Yes, standard 3-pin XLR connectors are designed for balanced audio connections, which helps to further reduce noise over longer cable runs.

No, this is a microphone cable designed for low-level audio signals. It is not suitable for carrying high-power speaker outputs, which require different types of connectors and cable gauges.

This refers to the standard wiring of an XLR connector where Pin 1 connects to Pin 1, Pin 2 to Pin 2, and Pin 3 to Pin 3 between the plug and socket, ensuring a direct and standard signal path.

The product description does not specify the cable length. Please refer to the product listing or packaging for specific length information.

Yes, standard XLR cables like this one are designed to carry phantom power from a mixer or interface to condenser microphones without issue.

Ensure both XLR connectors are fully seated in their respective ports. Check that the connected audio device is powered on and configured correctly. Test with a different microphone or audio interface to isolate the issue.

Verify that the cable is properly screened and undamaged. Ensure all connected equipment is properly grounded. Move the cable away from potential sources of electrical interference, such as power cables or large electrical appliances.

Inspect the connectors for any debris or damage. Gently wiggle the connectors while plugged in to check for loose connections. If the issue persists, the cable may be internally damaged and require replacement.