Johnstone's Trade Aqua Guard Gloss - Brilliant White - 1L

No, Johnstone's Trade Aqua Guard Gloss is specifically designed for interior wood and metal surfaces.

It is touch dry in 1-2 hours and ready for a second coat after 4-6 hours.

While it is a durable gloss, it is not specifically formulated for the high heat of radiators. Check the product's technical data sheet for specific high-heat compatibility if required.

Clean your brushes thoroughly with water immediately after painting.

The approximate coverage is 14 square meters per litre.

No, the formula is non-yellowing, designed to maintain its brilliant white appearance.

Yes, this paint is suitable for spray application. Ensure you follow manufacturer guidelines for spray equipment and thinning if necessary.

Ensure the surface was properly prepared (cleaned, degreased, and lightly sanded if previously glossy). Check that a suitable primer was used on bare or problematic surfaces.

Apply thinner coats and use a high-quality brush or roller. Ensure paint is applied evenly and avoid overworking it. Allow adequate drying time between coats.

Ensure the paint is thoroughly stirred. If necessary, a small amount of clean water (not exceeding 5% by volume) can be added to aid application, but avoid over-thinning.

Check ambient temperature and humidity; drying times can be extended in cold or damp conditions. Ensure no contaminants were present on the surface during application.