Johnstone's Trade Aqua Guard Satin - Brilliant White

It is suitable for interior and exterior use on a variety of surfaces including walls, wood, and metal, provided they are properly prepared and primed if necessary.

Recoating time is typically 4-6 hours, but this can vary depending on temperature and humidity. Ensure the surface is touch-dry before applying the next coat.

Yes, once fully cured, the satin finish is washable, making it ideal for high-traffic areas where cleaning may be required.

While it can be used on metal, specific heat-resistant paints are recommended for radiators. Check the product's technical data sheet for specific suitability.

Satin finishes have a low sheen, offering a softer look, while gloss finishes are highly reflective with a shiny appearance.

Priming is recommended for bare wood and metal, and any porous or problematic surfaces to ensure optimal adhesion and finish. Always check the specific surface requirements.

Clean brushes, rollers, and other equipment with water immediately after painting.

Ensure the surface was properly prepared and free from dust, grease, or moisture. Check that the correct primer was used for the substrate.

Apply the paint evenly with a quality brush or roller. Avoid overworking the paint, and maintain a wet edge to prevent lap marks. Ensure consistent application technique.

Ensure the surface underneath is adequately covered and not showing through. Verify that the correct paint tin has been opened and the color is indeed 'Brilliant White'.

Stir the paint thoroughly. If necessary and recommended on the product can, a small amount of clean water may be added, but avoid over-thinning.