Cuprinol Decking Stain - Natural - 5L

5L of the stain will cover approximately 8 m².

Apply 2-3 coats for best results.

The drying time is between 2 to 6 hours, depending on the conditions.

Yes, but you need to clean the surface, remove any dirt and grease and allow to dry first. Touch up bare areas before applying further coats.

No, this product is designed for outdoor use only.

Remove as much stain as possible before cleaning with water.

Check the product container for the expiry date. Store the product in a cool, dry place, away from extreme temperatures.

Ensure the surface is properly prepared, clean, and dry before application. Consider sanding the surface to remove any existing coatings and promote adhesion.

The final colour can depend on the wood type and the number of coats applied. Always test in an inconspicuous area and allow each coat to dry fully.

Ensure you are using the correct product and that it has been applied evenly. The anti-slip effect may be less noticeable if the surface is not properly prepared.

Ensure the application is done in the correct weather conditions. Avoid applying in temperatures below 5°C or in damp conditions. Make sure the deck is properly ventilated.