Rustins Quick Dry Polyurethane Varnish - Satin Pine - 250ml

You can use this varnish on bare wood, hardboard, MDF, and unsealed cork.

Yes, it is suitable for both indoor and outdoor use.

Apply at least two coats for adequate protection, and three or more coats for high-wear areas.

Clean tools with water immediately after use.

The varnish is quick-drying. Refer to the product label for specific drying times.

Store in a cool, dry place and keep the container tightly closed when not in use.

No, it is not recommended for previously painted surfaces. The existing paint must be removed before application.

This varnish provides a satin finish.

Ensure adequate ventilation and proper temperature. Apply thinner coats and allow sufficient drying time between coats.

Ensure the surface was properly prepared before application. Remove the existing finish, sand the surface, and reapply the varnish.

Avoid over-brushing. Apply thin, even coats and allow the varnish to level out. Ensure the application area is free from drafts.