Setup, Compatibility & Care
Preparation
- Surface Cleaning: Ensure the surface is clean, dry, and free from loose debris, oil, grease, and any existing coatings that are flaking or in poor condition.
- Surface Repair: Fill any cracks or holes with a suitable filler and allow it to dry completely.
- Priming (If Necessary): On porous surfaces or previously painted surfaces, consider using a primer recommended by Blackfriar for optimal adhesion.
Application
- Mixing: Stir the paint thoroughly before use.
- Application Method: Apply the paint using a brush or roller, ensuring even coverage.
- Coats: Apply two coats for best results, allowing three hours of drying time between coats.
- Drying Time: Allow the final coat to dry completely before allowing foot or vehicle traffic.
Compatibility
This paint is compatible with wood, concrete, cement, metal, brickwork and stone.
Care
Clean spills immediately with an appropriate cleaner. Regular sweeping and occasional washing with a mild detergent will help maintain the finish.