Dulux Weathershield Masonry Paint - White - 250Ml

This paint is specifically formulated for exterior masonry surfaces, including brick, concrete, pebble-dash, and render.

A 250ml tester pot will cover approximately up to 15 m² on average, depending on the surface porosity and application method.

You can recoat the paint in 4 hours, allowing for efficient project completion.

Yes, it is a water-based paint with minimal VOCs (Volatile Organic Compounds), making it a safer choice for your home and the environment.

The protective technology in this paint means your surfaces will be resistant to common outdoor elements such as water, mould growth, and ultraviolet radiation, helping the paint stay brilliant for longer and reducing everyday damage.

This paint is specifically designed and formulated for exterior masonry surfaces. For indoor painting, it is best to use products tailored for interior use.

Ensure the masonry surface is thoroughly cleaned, dry, and free of any loose particles, old paint, or efflorescence before application. Proper surface preparation is crucial for adhesion.

Apply the paint in thin, even coats using appropriate tools (brush or roller). Avoid applying too thickly or attempting to cover too large an area at once. Ensure consistent pressure and overlap slightly with each stroke.

Porous surfaces can absorb more paint. Ensure the surface is prepared correctly. For very porous surfaces, a suitable primer may be needed, though not explicitly required for this product. Apply an even coat and avoid stretching the paint too thinly.

Allow adequate drying time between coats (4 hours). Apply paint in consistent, smooth strokes, maintaining a 'wet edge' to prevent lines. Use high-quality brushes and rollers suitable for masonry paint.