Sadolin Wet Wood Decking Stain is a new, innovative water-based formula that can be applied to wet...Sadolin Wet Wood Decking Stain is a new, innovative water-based formula that can be applied to wet or dry wood, offering a durable, translucent, matt finish. It provides advanced UV protection, peel and flake resistance, and contains algae and mould inhibitors for long-lasting protection. This easy-to-apply decking stain can be recoated in 4-6 hours and is touch dry in 2-4 hours, with a spreading rate of up to 10m² per litre. Suitable for exterior wood care on decking, it is best applied with a good quality synthetic fibre bristle brush.
Sadolin Light Oak Wet Wood Decking Stain-2.5 LFree delivery in 1–3 days£32.21Visit shop →
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their exterior wooden decking. Sadolin Wet Wood Decking Stain offers a unique water-based formula that can be applied to wet or dry wood, providing a durable, translucent, matt finish. The primary caveat is ensuring proper surface preparation for optimal adhesion and longevity.
All features
Colour
Brown
Model Part Number
456936
Brand
Sadolin
Extended Product Information
FAQs
Can I apply Sadolin Wet Wood Decking Stain on wet wood?
Yes, this is one of the key features of this product. It can be applied to wet or dry wood.
How long does it take for the stain to dry?
It is touch dry in 2-4 hours and can be recoated in 4-6 hours.
How many coats of stain should I apply?
It is recommended to apply at least two coats for optimal protection and appearance.
What kind of brush should I use?
Use a good quality synthetic fibre bristle brush.
What is the coverage rate of this stain?
The spreading rate is up to 10m² per litre.
Does this stain protect against algae and mould?
Yes, it contains algae and mould inhibitors for long-lasting protection.
What is the finish of the stain?
It provides a durable, translucent matt finish.
How do I maintain the stained decking?
Regularly clean the decking with a soft brush and mild soapy water. Inspect periodically and recoat as needed.
Troubleshooting
Stain is not adhering properly.
Ensure the wood surface is clean, dry, and properly prepared. Lightly sand if necessary.
Stain is peeling or flaking.
Make sure the surface was properly prepared. Apply thin, even coats and avoid over application.
Colour appears uneven.
Stir the stain thoroughly before and during application. Apply an even coat, and avoid applying too much stain in one area.
Stain takes too long to dry.
Ensure proper ventilation and check the application conditions (temperature and humidity).
Pros and Cons
Pros
Can be applied to wet wood, saving time and effort.
Provides excellent UV protection, extending the life of your decking.
Resists peeling and flaking, ensuring a long-lasting finish.
Contains algae and mould inhibitors for added protection.
Easy to apply with a brush.
Fast drying and recoating times allow for quick project completion.
Cons
Requires proper surface preparation for optimal results.
The finish is translucent, so the wood grain will still be visible.
Water-based formula may not be as durable as some solvent-based alternatives.
May require multiple coats for desired colour and protection.
Setup, Compatibility & Care
Setup
Surface Preparation: Clean the decking thoroughly. Remove any existing coatings, dirt, algae, or mould. Lightly sand the surface if necessary to improve adhesion. Ensure the wood is structurally sound.
Application: Stir the stain well before use. Apply the stain evenly using a good quality synthetic fibre bristle brush. Apply in the direction of the wood grain.
Coats: Apply at least two coats for optimal protection. Allow the recommended drying time between coats.
Compatibility
Suitable for use on most types of exterior decking.
Best applied on bare wood or previously stained surfaces.
Always test on a small, inconspicuous area first to check for compatibility and desired colour.
Care
Regularly clean the decking with a soft brush and mild soapy water to remove dirt and debris.
Inspect the decking periodically for any signs of wear or damage.
Recoat as needed to maintain protection and appearance. The frequency will depend on the exposure to the elements and foot traffic.