A ready mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry....A ready mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry. Durable and protective. Ideal for steps and stairways, disabled ramps, doorways, machinery areas, most floors and other areas where moisture and other substances may cause the floor to be slippery. Suitable for indoor and outdoor use. Suitable for use on suitably prepared concrete, wood, metal and GRP. This paint helps prevent accidents and is available in 9 colours. It has an aggregated finish and can be applied by roller or brush. It is touch dry in 6 hours and hard dry in 24 hours, with an overcoat time of 16 hours or overnight. Estimated coverage is 6-10m² per litre. This high performing safety coating provides durability, decoration, and protection.
This guide provides essential information for users of Coo-Var Suregrip Anti-Slip Floor Paint - Yellow. Designed for various surfaces, it helps prevent slips and falls in areas prone to moisture or other hazards. Please note that proper surface preparation is crucial for optimal performance.
All features
Colour
Yellow
Brand
Coo-Var
Extended Product Information
FAQs
What surfaces can I use this paint on?
Coo-Var Suregrip Anti-Slip Floor Paint can be used on properly prepared concrete, wood, metal, and GRP surfaces.
How long does it take to dry?
It is touch dry in approximately 6 hours and hard dry in 24 hours.
What is the coverage rate?
The estimated coverage is 6-10m² per litre.
Can this paint be used outside?
Yes, it is suitable for both indoor and outdoor use.
How should I clean the painted surface?
Clean spills immediately and use appropriate cleaning agents for regular cleaning.
What should I do if the paint isn't drying properly?
Ensure the application temperature is within the recommended range. Check for contaminants and ensure adequate ventilation.
Can I apply a second coat?
Yes, an overcoat can be applied after 16 hours or overnight.
Troubleshooting
Paint is not drying properly.
Ensure the application temperature is within the recommended range. Check for any contaminants on the surface. Ensure adequate ventilation.
Paint is peeling or flaking.
Ensure proper surface preparation. Remove any loose paint and reapply, following the preparation and application guidelines.
Poor anti-slip performance.
Ensure the paint was mixed well before application. Make sure the paint was applied evenly and according to the instructions.
Pros and Cons
Pros
Enhanced safety due to anti-slip properties.
Suitable for use on a variety of surfaces.
Provides durable and protective finish.
Relatively quick drying time.
Available in multiple colors.
Cons
Requires proper surface preparation for optimal results.
Coverage is moderate (6-10m² per litre).
Overcoat time of 16 hours or overnight.
Aggregated finish might be more difficult to clean than a smooth surface.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from any loose material, grease, or contaminants. Properly prepare the surface according to the material (e.g., concrete, wood, metal, GRP).
Application: Apply using a roller or brush. Stir well before use.
Drying Time: Allow 6 hours for touch dry and 24 hours for hard dry. An overcoat can be applied after 16 hours or overnight.
Coverage: The estimated coverage is 6-10m² per litre.
Compatibility: Suitable for use on concrete, wood, metal, and GRP. Always test in an inconspicuous area first to ensure compatibility and desired finish.
Care: Clean spills immediately. Regular cleaning with appropriate cleaning agents is recommended to maintain the anti-slip properties and appearance.