Ronseal Diamond Hard Floor Paint offers tough protection against knocks, scuffs, scrapes, and spil...Ronseal Diamond Hard Floor Paint offers tough protection against knocks, scuffs, scrapes, and spills. It is suitable for wood, concrete, and stone floors, providing a satin finish. The paint requires approximately 3 coats and offers a coverage of up to 12m² per litre. This formula provides long-lasting protection, is touch-dry in 4 hours, and recoatable within 4-6 hours. No primer or lacquer is needed. Supplied in a 750ml tin, it provides up to 9m² of coverage. This variant comes in a stylish slate grey finish.
Ronseal Diamond Hard Satin Floor Paint 5 Litre SlateFree delivery in 1–3 days£69.34Visit shop →
Product Information
Full details
This guide is for anyone looking to protect and refresh their floors with Ronseal Diamond Hard Floor Paint. It's ideal for wood, concrete, and stone surfaces, offering a durable, satin finish. While it provides excellent protection against wear and tear, remember that proper surface preparation is key for optimal results.
All features
Colour
Grey
Model Part Number
Skip20A
Brand
Ronseal
Extended Product Information
FAQs
What surfaces can I use this paint on?
Ronseal Diamond Hard Floor Paint is suitable for use on wood, concrete, and stone floors.
How many coats of paint are needed?
It is recommended to apply approximately 3 coats for optimal protection and finish.
How long does it take for the paint to dry?
The paint is touch-dry in 4 hours and recoatable within 4-6 hours.
Do I need to use a primer?
No, Ronseal Diamond Hard Floor Paint does not require a primer.
How much area will a 750ml tin cover?
A 750ml tin will cover up to 9m².
Can I use this paint in high-traffic areas?
Yes, this paint is designed for high-traffic areas and offers tough protection against wear and tear.
How do I clean the painted floor?
Clean the floor with a damp cloth and mild detergent. Avoid using abrasive cleaners or scrubbing pads.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces before applying the paint.
Paint finish is uneven.
Apply thin, even coats of paint, avoiding over-application. Ensure the paint is stirred well before use.
Paint is taking longer than expected to dry.
Ensure proper ventilation and that the room temperature is within the recommended range. Avoid applying thick coats of paint.
Pros and Cons
Pros
Provides tough, long-lasting protection.
Suitable for a variety of floor types.
Offers a stylish satin finish.
Quick drying times minimizes downtime.
Easy to apply, no primer needed.
Cons
Requires multiple coats for best results.
Coverage can vary based on surface porosity and application method.
Requires careful surface preparation for optimal adhesion.
Setup, Compatibility & Care
Preparation: Thoroughly clean the floor, removing any dirt, grease, or old coatings. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply 2-3 thin coats, allowing each coat to dry completely.
Drying Time: The paint is touch-dry in 4 hours and recoatable in 4-6 hours. Avoid heavy use during this period.
Compatibility: This paint is compatible with wood, concrete, and stone floors. Always test on an inconspicuous area first to ensure compatibility and desired finish.
Care: Clean spills immediately. Regularly clean the floor with a damp cloth and mild detergent. Avoid abrasive cleaners or scrubbing pads.