Coo-Var Shellac Prime-All Stain Blocker Sealer & Primer - White

It's suitable for wood, cement, plaster, brickwork, and some plastics.

It is touch dry in 10 minutes and recoatable after 30 minutes.

Lightly sand glossy surfaces for better adhesion.

Clean your equipment immediately after use with methylated spirits.

Yes, Coo-Var Shellac Prime-All is suitable for both interior and exterior use.

One coat is usually sufficient, but severe stains may require a second coat.

It blocks difficult stains like water stains, pen oils, tar, and bitumen.

Coo-Var Shellac Prime-All is compatible with most topcoats. It is always recommended to test compatibility on a small area first.

Ensure the primer coat is fully dry. Apply a second coat of primer if necessary. Ensure proper surface preparation. The stain may be too severe for a single coat.

Ensure the surface is clean and free of contaminants. Lightly sand glossy surfaces. Ensure that the primer is not past its expiration date.

Ensure adequate ventilation. Check the temperature and humidity levels in the environment. Apply a thinner coat of primer.