Ronseal Diamond Floor Varnish - Medium Oak - Satin
This medium oak floor varnish from the Ronseal Diamond range can be applied to interior using a br...This medium oak floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average. Diamond Hard Floor Varnish brings out the natural finish in your wooden floors and provides long-lasting protection against every day knocks, scuffs... Ronseal Diamond Hard Coloured Floor Varnish 2.5L Medium Oak Ultimate colour and protection for valued wooden floors Enhances and prolongs the natural beauty of wood flooring Ideal for areas of heavy foot traffic Protects wood against scuffs, scratches and spills Non-yellowing finish Ronseal's hardest ever floor varnish Touch dry in 30 minutes, recoat after 2 hours. Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
This guide is for anyone looking to protect and enhance their wooden floors with Ronseal Diamond Wood Floor Varnish in Medium Oak. It offers a durable satin finish and provides excellent coverage, making it ideal for interior use. However, ensure proper surface preparation for optimal results. This product is easy to apply with a brush and dries quickly, saving you time and effort. Key features include a long-lasting satin finish, quick drying time, and good coverage.
All features
Colour
Brown
Brand
Ronseal
Extended Product Information
FAQs
How long does it take for the varnish to dry?
The varnish dries in approximately 30 minutes, allowing for quick project completion.
What is the coverage rate?
Each litre covers approximately 18 square meters.
Can I use this varnish on exterior surfaces?
No, this varnish is designed for interior use only.
How should I clean the floor after varnishing?
Sweep or vacuum regularly to remove dirt and debris. Clean spills immediately and use a damp cloth for cleaning.
Do I need to sand the floor before applying the varnish?
Yes, sanding the floor is recommended to ensure a smooth surface and enhance the varnish's adhesion.
How many coats of varnish should I apply?
Apply at least two coats for optimal protection and finish. Additional coats may be needed for areas with high traffic.
Troubleshooting
Varnish is not drying properly.
Ensure adequate ventilation and check the room temperature. Make sure the application is not too thick.
The finish is not even.
Sand the surface lightly and apply another thin coat of varnish, ensuring even coverage with the brush.
Pros and Cons
Pros
Durable satin finish protects floors.
Fast drying time saves time and allows for quicker project completion.
Easy brush application for DIY users.
Good coverage rate minimizes the amount of product needed.
Cons
Requires proper surface preparation for optimal results.
May require multiple coats for desired finish.
Colour may vary slightly depending on the wood type.
Setup, Compatibility & Care
Preparation: Ensure the floor is clean, dry, and free from old varnish or wax. Sand the wood to create a smooth surface.
Application: Stir the varnish well before use. Apply a thin, even coat using a brush, following the grain of the wood.
Drying: Allow the first coat to dry for approximately 30 minutes. Apply a second coat if required.
Compatibility: Suitable for use on most interior wooden floors. Test on a small, inconspicuous area first to check compatibility and colour.
Care: Clean spills immediately. Regularly sweep or vacuum the floor to remove dirt and debris. Avoid harsh chemicals when cleaning; use a damp cloth.
Amazon£16.99Visit shop 
eBay£25.99Visit shop 
