Farrow & Ball Estate Emulsion Paint - White - 2.5L

Estate Emulsion has a distinctive chalky matte finish that scatters light, creating a rich depth of colour and a soft, velvety appearance.

No, Farrow & Ball Estate Emulsion is not recommended for bathrooms or kitchens as it is not durable enough to withstand high humidity or frequent cleaning required in these areas.

A 2.5L tin typically covers approximately 10-12 square meters (107-129 sq ft) per coat, but this can vary depending on the surface texture and absorbency.

Yes, provided the existing paint is in good condition. Lightly sand the surface and clean it thoroughly before applying an appropriate Farrow & Ball primer and then the Estate Emulsion.

It typically takes around 2 hours for the paint to dry to the touch, and a further 4 hours before a second coat can be applied. Full curing may take longer.

For light marks, use a soft, damp sponge with a little water. Avoid scrubbing or using abrasive cleaners, as this can damage the delicate matte finish.

The low VOC (Volatile Organic Compound) formula means the paint has very little odour during application and drying, contributing to better indoor air quality and a more pleasant experience.

Ensure the surface was properly prepared and primed. Apply paint evenly with a consistent technique, maintaining a wet edge. Allow adequate drying time between coats and apply a second coat if necessary.

Colour appearance can vary based on lighting conditions and surrounding colours. Test a small area first. Ensure you have applied the recommended number of coats. Check that you are using the correct Farrow & Ball primer.

Estate Emulsion has a delicate matte finish and is not designed for heavy scrubbing. Use a soft, damp sponge with minimal water for light marks. Avoid harsh chemicals or abrasive materials.

Ensure you are using a high-quality brush and applying the paint with light, even strokes. Work in consistent sections, maintaining a wet edge to avoid overlapping dried paint.