Farrow & Ball Modern Emulsion Paint 5L - Cream

Yes, Modern Emulsion is ideal for bathrooms and kitchens due to its washable, scuff-resistant, and mould-resistant qualities.

You can clean the walls with a soft cloth or sponge using mild soap and water. Gently wipe away marks, and rinse with clean water if necessary.

Typically, it is dry to touch in 1-2 hours and ready for a second coat after 2-4 hours. Always refer to the product tin for specific drying times.

Modern Emulsion is designed for walls and ceilings. For woodwork, Farrow & Ball offers specific finishes like Eggshell or Full Gloss.

VOC stands for Volatile Organic Compounds. Low VOC means the paint releases fewer of these compounds into the air, making it better for indoor air quality and the environment.

Generally, two coats are recommended for best results, providing full colour depth and durability. However, this can vary depending on the surface and the colours being painted over.

Modern Emulsion is more durable, washable, and resistant to stains and mould, making it suitable for high-traffic areas. Estate Emulsion has a more traditional, chalky finish but is less resistant to washing and wear.

This can occur when the paint dries too quickly or if coats are not applied evenly. Ensure good ventilation but avoid painting in direct sunlight or draughts. Maintain a 'wet edge' when painting by working in manageable sections and overlapping slightly with the previous section.

Ensure the surface was properly primed and that the recommended number of coats (usually two) has been applied. For drastic colour changes, a primer tinted to a similar shade as the topcoat may be necessary.

Check that the paint has been stirred thoroughly. Ensure your brush or roller is suitable for emulsions. If the paint seems too thick, a very small amount of water might be added, but follow manufacturer recommendations closely to avoid compromising the finish.

While mould-resistant, the paint is not a cure for underlying damp or condensation issues. Address the source of moisture (e.g., improve ventilation, fix leaks) before repainting.