Best current price£6.28from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£6.28Visit shop Rustins Grain Wood Dye Ebony 250Ml Wdeb250
Visit shop
B&Q£9.14Visit shop B&Q - Wood Dye Ebony 250Ml For Interior & Exterior
Visit shop20 offers from £6.28 - £34.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals looking to color bare wood before applying a finish. The Rustins Wood Dye in Ebony provides a fast-drying, penetrating stain that doesn't raise the wood grain, offering a deep, non-fading color. A key consideration is that the final shade achieved is influenced by the wood's original color and the subsequent finish applied.
| Colour | Black |
|---|---|
| Model Part Number | WDEB250 |
| Brand | Rustins |
No, this wood dye is specifically designed for use on *bare* wood only. Any existing finishes must be completely removed before application.
The dye is fast-drying. Typically, it will be dry to the touch within 15-30 minutes, but always allow sufficient time for it to fully cure before applying a topcoat.
You can use any of Rustins wood finishes, such as varnishes, lacquers, or oils, once the dye is completely dry. Ensure the topcoat is compatible with wood dyes.
Yes, Rustins Wood Dye shades are intermixable, allowing you to create an infinite variety of natural wood shades by blending different colors.
The final color achieved depends significantly on the original color of the wood and the type of finish applied over the dye. Always test on an inconspicuous area first.
Yes, this product conforms to the Safety of Toys Regulations BS EN 71 Part 3 1995.
Yes, Rustins Wood Dye is suitable for both interior and exterior use, provided it is properly sealed with a suitable exterior-grade topcoat.
Ensure the wood surface is properly prepared and free of dust. Apply the dye evenly and wipe off any excess promptly. For very porous wood, a diluted first coat may be beneficial.
Confirm that the wood is indeed bare and has not been sealed by a previous finish. Ensure there are no contaminants like wax or oil on the surface. Sanding may be required to open up the wood fibers.
Allow the first coat to dry completely and apply a second coat. Alternatively, mix the Ebony dye with a darker shade if available, or consider a different, deeper color if the desired intensity is not achievable.
Although this dye is formulated not to raise the grain, if this occurs, lightly sand the surface with very fine-grit sandpaper (e.g., 240 grit) after the dye is fully dry, then reapply if necessary.
Setup: Ensure the wood surface is bare, clean, dry, and free from dust, grease, and previous finishes. Sand the wood smooth, working through progressively finer grits. Wipe away all dust before application.
Compatibility: This wood dye is designed for use on all types of new bare wood or wood that has been stripped back to its natural state. It is intended to be used *prior* to applying any of Rustins wood finishes, such as varnishes, lacquers, or oils. The final color achieved is dependent on the original color of the wood and the type of coating applied over the dye. It conforms to Safety of Toys Regulations BS EN 71 Part 3 1995.
Care: Store the dye in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lid is tightly sealed between uses. Clean application tools immediately after use with water. Spills should be cleaned up promptly to prevent staining.
