Rustins Wood Dye - Red Mahogany

Yes, the dyes are designed to be intermixed to create an infinite variety of natural wood shades. Experiment on scrap wood to achieve your desired color.

Apply thinly and evenly using a brush or a clean cloth. For larger areas, a spray application can also be used. Always test on an inconspicuous area first.

Yes, the wood dye is a colorant and requires a protective topcoat such as varnish, lacquer, or oil to ensure durability and protection against wear and moisture.

The dye is fast-drying. Drying times can vary depending on temperature, humidity, and application thickness, but it is generally dry to touch within a short period, allowing for recoating relatively quickly.

Yes, it is suitable for both interior and exterior use. However, for exterior applications, it is essential to apply a suitable exterior-grade protective topcoat to ensure longevity and weather resistance.

The dye is formulated to be non-fading, ensuring that the color remains consistent over time, provided it is protected with an appropriate topcoat.

Clean application tools immediately after use with a suitable solvent. Once the finish is dry, the wood surface can be cleaned with a soft, damp cloth.

Apply additional thin coats, allowing each to dry completely. Ensure even application across the surface.

While this dye is designed not to raise the grain, this can sometimes occur on certain woods. Lightly sand with very fine-grit sandpaper after drying and reapply a thin coat if necessary. Ensure the wood was properly prepared beforehand.

Ensure you are applying thinly and allowing adequate drying time between coats. Check ventilation. If bleeding occurs, try applying a test on a scrap piece to understand the wood's absorbency.