Everbuild General Purpose Silicone Sealant - Grey

No, Everbuild General Purpose Silicone is not designed to be painted over once cured. It's best to achieve the desired colour finish with the sealant itself or use a paintable sealant for painted surfaces.

Unopened cartridges typically have a shelf life of 12-18 months when stored in cool, dry conditions. Once opened, it is best used within a few weeks for optimal performance.

The sealant skins over in approximately 15-30 minutes and fully cures within 24-48 hours, depending on bead size, temperature, and humidity. Avoid stressing the seal until fully cured.

Yes, it is suitable for exterior use, providing a waterproof and weather-resistant seal for applications like window frames and gutter joints.

It is generally not recommended for use on porous natural stone as it can cause staining. Always test on an inconspicuous area or consult the manufacturer's guidelines for specific stone types.

Mid-modulus silicones offer a balance of adhesion and flexibility, suitable for general-purpose sealing with moderate movement. High-modulus silicones are more flexible and designed for larger movement joints or specific applications like structural glazing.

Carefully cut along the edges of the old sealant with a sharp knife or sealant removal tool. Apply a silicone remover product if necessary to soften stubborn residue, then wipe clean.

Ensure the inner seal is pierced and the cartridge is correctly loaded into the sealant gun. Check if the nozzle is clear.

Verify the surface is clean, dry, and free from dust, grease, or old sealant. For some materials, a primer might be necessary.

Practice application on a scrap surface. Ensure the nozzle is cut at the correct angle and apply steady pressure to the sealant gun. Smooth the bead immediately after application.

While the sealant contains anti-fungal agents, severe persistent mould may indicate inadequate ventilation or excessive moisture. Address the underlying issue and ensure the area is cleaned regularly.

Ensure the product has not passed its expiry date. Application in extremely low temperatures or high humidity can slow curing. Allow sufficient time for full cure in appropriate conditions.