Osprey Talon 22 Backpack - Phantom Grey/Dark Charcoal

The Talon 22 is ideal for fast-paced day activities such as hiking, trail running, mountain biking, and general outdoor recreation. Its 22-liter capacity is designed for single-day excursions.

The pack is made from 100D x 210D wave check high-tenacity nylon, which offers good water resistance against light rain or splashes. For heavy downpours, we recommend using a separate rain cover (not included) to protect your gear.

Hand wash the pack with mild soap and cool water. Use a soft brush for soiled areas and rinse thoroughly. Air dry completely in a shaded, well-ventilated space. Do not machine wash or tumble dry.

While it doesn't have a dedicated padded laptop sleeve, a smaller laptop (e.g., 13-inch or smaller) might fit in the main compartment, possibly in the hydration sleeve if not used for a reservoir. For larger laptops, the fit may be tight or not suitable.

No, the Osprey Talon 22 features an external hydration reservoir sleeve, but the reservoir itself is sold separately.

To adjust, first loosen all straps. Put on the pack and secure the hipbelt over your hip bones. Then, tighten shoulder straps until snug, and finally adjust the sternum strap and load lifters (if applicable) for personalized comfort. Refer to the 'Setup & Adjustment' section for detailed steps.

While there's no strict maximum weight listed, the Talon 22 is designed for lighter loads typical of day trips. Overloading it can compromise comfort and the pack's structure. Aim for a comfortable carrying weight, usually under 15-20 lbs (Info needed: confirm specific manufacturer recommendation if available).

Ensure the hipbelt is properly centered on your hips and tightened. Adjust shoulder straps to carry weight primarily on your hips. Fine-tune the sternum strap and load lifters (if present) for an optimal fit. Reposition heavier items closer to your back.

For trekking poles, ensure the lower loop is around the basket end and the upper bungee cinches around the shaft near the handle. For the LidLock, thread the cord through a vent on your helmet and secure the toggle. Refer to the specific attachment points mentioned in the product guide.

Check all seals on the reservoir and hose for proper connection. Ensure the external hydration sleeve is clear of obstructions. It's often easier to fill the reservoir, then slide it into the sleeve before fully loading the main compartment.

Avoid forcing the zipper. Gently pull fabric away from the zipper teeth and try to move the slider. If debris is present, try to dislodge it carefully. A small amount of zipper lubricant or wax can help smooth operation.

Hand wash the affected area with mild soap and cool water, using a soft brush. Rinse thoroughly and air dry completely. For stubborn stains, a specialized gear cleaner may be used, following product instructions.