Muriva Elixir Wallpaper - Blue & Silver - Marble Metallic Effect Embossed

No, the Muriva Elixir Marble wallpaper is a traditional wallpaper that requires wallpaper paste for application. Please check the roll's label for specific 'paste the wall' or 'paste the paper' instructions.

This wallpaper is generally suitable for most dry interior rooms. For areas with high humidity like bathrooms or kitchens, ensure adequate ventilation. It is not designed for direct contact with water.

Gently wipe the surface with a soft, damp cloth to remove dust or light marks. Avoid using abrasive cleaners or excessive scrubbing, which can damage the metallic effect and embossed texture.

We recommend using a good quality, ready-mixed wallpaper paste suitable for embossed or heavy-weight wallpapers. Always refer to the wallpaper roll's label for specific paste recommendations.

Measure the height and width of your walls. Divide the total perimeter of the room by the width of one roll to get the number of strips. Then, divide the total wall height by the pattern repeat length (found on the label) to determine how many full drops you can get from a single roll. It's always best to purchase an extra roll to account for pattern matching and potential errors.

The ease of removal depends on the wall preparation and type of paste used. If walls were properly primed before installation, removal should be easier. It is typically strippable or peelable when wet, but this can vary.

Info needed: Please refer to the label on the wallpaper roll for the exact pattern repeat measurement. This information is crucial for accurate cutting and pattern matching.

Gently smooth out bubbles with a wallpaper smoother or brush, working from the center of the bubble towards the nearest edge. For stubborn bubbles, carefully puncture with a fine needle and smooth the air out.

Ensure walls are properly sized and paste is applied evenly. When hanging, butt seams tightly together without overlapping. Use a seam roller gently to secure edges without flattening the embossed texture.

This could be due to insufficient paste, improper wall preparation, or dry spots. Lift the affected area carefully, apply more paste to the wall or paper as needed, and re-smooth firmly. Ensure the room temperature is stable during drying.