Muriva Elixir Cube Wallpaper - Blue - Checkered

While high-quality, this specific wallpaper is not explicitly rated for high-humidity environments like bathrooms or kitchens. For optimal longevity and appearance, it's best used in drier areas such as bedrooms, living rooms, and hallways.

For 'paste the wall' wallpaper, we recommend using a good quality ready-mixed wallpaper adhesive. Follow the paste manufacturer's instructions for best results.

The smooth finish allows for gentle cleaning. Use a soft, damp cloth or sponge with a mild soap solution. Avoid abrasive cleaners, harsh scrubbing, or excessive moisture, as these can damage the metallic effect or the paper itself.

Yes, as it features an intricate 3D cube design, this wallpaper will have a pattern repeat. It's crucial to account for this when measuring and cutting strips to ensure seamless alignment of the geometric pattern.

This wallpaper is designed to be a finished decorative surface with metallic effects and intricate patterns. Painting over it would cover these unique features and is not recommended.

The 'paste the wall' method generally makes installation easier than traditional 'paste the paper' wallpaper. However, due to the detailed 3D geometric pattern, beginners should take extra time and care with measuring and pattern matching to achieve a professional finish.

You will need a tape measure, a sharp utility knife, a straight edge, a plumb line or level, a wallpaper brush or smoother, a clean sponge, and a suitable ready-mixed wallpaper adhesive.

Ensure walls are properly prepped and paste is evenly applied. Gently smooth out bubbles from the center to the edges using a wallpaper brush or smoother before the paste dries. If the paste is already dry, carefully inject a small amount of paste with a syringe and re-smooth.

The 3D geometric pattern requires precise matching. When hanging, ensure each new strip is carefully aligned with the previous one before pressing firmly onto the wall. If the paste is still wet, you can gently peel back and re-position. Use a plumb line for the first strip to ensure a straight start.

Always wipe away excess paste immediately with a clean, damp sponge during installation. Dried paste can be difficult to remove without damaging the wallpaper surface or metallic finish. If dried, try a very lightly damp sponge, but test in an inconspicuous area first.

This often indicates insufficient paste or improper surface preparation. Re-apply a small amount of adhesive to the peeling edge using a fine brush and press firmly. Ensure the wall is clean and dry before initial application.