Dulux Trade High Gloss - White - 2.5L

This paint is suitable for interior and exterior wood and metal surfaces, including doors, frames, skirting boards, and radiators.

Coverage is up to 18 sqm per litre, so a 2.5L tin should cover approximately 45 sqm, depending on the surface and application method.

Ensure the surface is clean, dry, and free from loose paint or rust. Sand glossy surfaces to create a key. Apply the appropriate Dulux Trade Undercoat.

Apply one coat of the appropriate Dulux Trade Undercoat, followed by one or two coats of Dulux Trade High Gloss.

Allow a minimum of 16 hours between coats. The minimum drying time is 4 hours, and the maximum is 6 hours.

No, spray application is not recommended for health and safety reasons. Brush or roller application is recommended.

Clean brushes and rollers with brush cleaner immediately after use.

The Volatile organic compounds (VOC) content is 300 g/l.

Ensure the paint is thoroughly stirred. Apply thin, even coats, and use a high-quality brush or roller. Consider adding a paint conditioner.

Ensure good ventilation during application and drying. Check the temperature and humidity levels in the room, as these can affect drying times. Ensure the undercoat is fully dry.

Ensure the surface is properly prepared. Apply thin, even coats, and allow sufficient drying time between coats. Use an appropriate undercoat.

Ensure the surface is properly prepared (clean, dry, and sanded). Apply the correct undercoat. Ensure the paint is applied in the correct temperature range.