Dulux Trade Quick Dry Gloss - White

You can use this gloss paint on interior wood, ferrous metals, non-ferrous metals, and MDF. It's ideal for trim, doors, and other indoor fixtures.

Yes, this product is part two of an advanced system. For best results, you must use Dulux Trade Quick Dry Undercoat as the first step.

Typically, 1 or 2 coats are sufficient after the undercoat. If you are covering a strong colour change, you may need 3 coats of the gloss.

The paint is recoatable in 4-6 hours, allowing for quick progress on your project.

Yes, it is suitable for normal kitchens and bathrooms. However, it is not recommended for immersed surfaces or areas with prolonged and heavy condensation.

For best results, use a good quality synthetic (nylon polyester) brush specifically designed for water-based paints.

The approximate coverage is 12 m²/L, but this can vary based on the surface's porosity and your application technique.

Since it's a water-based paint, you can clean your brushes and rollers with water immediately after use.

Ensure you are stirring the paint thoroughly before and during use. Apply with a good quality synthetic (nylon polyester) brush or roller, applying even pressure. Avoid overworking the paint.

This often indicates inadequate surface preparation or an incompatible undercoat. Ensure the surface is clean, dry, and sound. Always use Dulux Trade Quick Dry Undercoat as recommended, and sand glossy surfaces to create a 'key'.

Check environmental conditions. High humidity or low temperatures can prolong drying times. Ensure good ventilation in the room. Avoid applying overly thick coats, as this can also extend drying.

Make sure you have applied the recommended number of coats (1-2, or 3 for strong colour changes). Ensure the undercoat is fully dry and smooth. Stir the gloss paint well before each use to ensure even distribution of gloss agents.