Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from any loose paint, rust, grease, or wax. Lightly sand the surface to provide a key for the paint to adhere to.
- Priming: For best results, especially on bare wood or metal, apply Rustins Quick Drying Primer Undercoat.
- Application: Stir the paint thoroughly before use. Apply the paint in thin, even coats using a brush or a roller. Avoid applying too much paint at once to prevent runs or sags. Two coats are generally recommended.
- Drying Time: The paint is touch dry in approximately 30 minutes. Allow sufficient drying time between coats. Full drying time may vary depending on the temperature and humidity.
- Cleaning: Clean brushes and rollers immediately after use with water.
Compatibility: This paint is compatible with existing paints and varnishes, but always test on a small, inconspicuous area first to ensure compatibility.