Johnstone's Wall & Ceiling Paint - Frosted Silver - Matt - 2.5L

This paint is designed for standard interior walls and ceilings. It is not specifically formulated to resist the high humidity or steam found in kitchens and bathrooms.

Due to its high concentration, one to two coats are usually sufficient depending on the color of the underlying surface.

While it is designed for roller and brush application, some professional spray systems may be used if the paint is thinned according to the equipment manufacturer's instructions.

The paint is quick-drying, typically touch-dry within a few hours, though drying times can vary based on room temperature and humidity.

You should sand the existing oil-based surface thoroughly to create a key for the new paint to adhere to, or use a suitable primer first.

It can be lightly wiped with a soft, damp cloth, but it is not a 'scrubbable' paint like some specialized durable emulsions.

Ensure you are using a good quality roller and maintaining a 'wet edge' by not over-working the paint once it begins to set.

This is often due to poor surface preparation; ensure the wall was clean, dry, and free of dust or grease before painting.

The surface may have been too porous. Apply a primer or a mist coat (watered-down emulsion) to seal the surface before applying the final topcoats.