Art Studio Magnetic Craft Tape

The Art Studio Magnetic Craft Tape is designed for lightweight items like paper, photos, and thin cardstock. For heavier items, such as thicker card or small laminated pieces, we recommend using multiple strips of tape to distribute the load and increase magnetic contact.

While the tape offers good adhesion, prolonged exposure to direct sunlight, moisture, and extreme temperatures outdoors is not recommended. These conditions can degrade both the adhesive and the magnetic properties over time. It is best suited for indoor use.

The adhesive is generally safe for most common crafting materials. However, if you are applying it to delicate, antique, or painted surfaces, it is always best to test a small, inconspicuous area first to ensure there is no residue or damage upon removal.

To remove, gently peel the tape from one corner, pulling slowly and steadily. If any adhesive residue remains, a mild adhesive remover can be used, but always test on a small area first to avoid damage to your item.

Yes, absolutely! The Art Studio Magnetic Craft Tape can be easily cut with standard household scissors to create custom lengths, shapes, or smaller pieces to fit your specific crafting needs.

The adhesive side of the tape sticks to your chosen item (e.g., paper). The magnetic side of the tape then allows that item to stick to *ferrous metallic* surfaces (like a refrigerator or metal board). It will not directly stick to non-metallic surfaces with its magnetic property.

Ensure the metallic surface is clean and genuinely ferrous (magnets stick to it). For larger or heavier items, try using more strips of magnetic tape, spread out for better hold.

Make sure the artwork's surface is clean, dry, and smooth before application. Apply firm, even pressure to the tape for at least 10-15 seconds after sticking it down. Avoid oily or heavily textured surfaces.

This often indicates the item is too heavy for the amount of tape used. Add more strips of magnetic tape, especially along the edges or across the center, to increase the magnetic surface area and holding power. Ensure the metallic surface is perfectly vertical and clean.

Environmental factors like humidity or heat can affect adhesive longevity. Reapply with a fresh piece of tape, ensuring the surface is thoroughly cleaned and dried beforehand. For critical applications, consider using a wider strip or multiple strips.