Milwaukee Thin Metal Cutting Disc - SCS41 - 125 x 1mm

These discs are designed for cutting stainless steel, acid-resistant steel, Hardox®, heat-resistant cast steel, spring steel, mild steel, and tool steel.

The discs have a 125mm diameter and a 22.2mm bore size.

Yes, these discs are optimized for cordless use, providing high performance and longer run times.

Store the discs in a dry place to prevent moisture damage.

Always wear safety glasses, gloves, and a dust mask or respirator when using these discs. Ensure you are using the disc in a well-ventilated area.

The lifespan of the disc depends on the material being cut, the cutting pressure, and the frequency of use. Proper technique and care will extend the disc's life.

Pro+ technology provides hydro-protection against moisture, which helps extend the disc's life.

The disc must be compatible with a 125mm diameter and 22.2mm bore size angle grinder.

Check the cutting pressure and material type. Using excessive force or cutting incompatible materials can accelerate wear. Make sure you are using the correct disc for the job. Ensure that you are using the correct cutting technique.

Reduce cutting pressure and ensure the disc is making proper contact with the material. Inspect the disc for damage; replace if necessary.

Check if the disc is compatible with the metal being cut. Ensure the disc is mounted correctly and that the grinder is operating at the recommended speed.

Reduce cutting pressure and change the cutting angle slightly to prevent binding. If the disc is frequently binding, consider using a different disc type.