Brake Caliper Spray Paint - Blue - 400 ml

Brake caliper paint is designed for changing the appearance of calipers and brake drums on cars an...

Best current price£9.99from B&Q

One Offer

1 offer from £9.99

View price history by clicking the chart icon.

B&QB&Q - 400 Ml Blue Brake Caliper PaintHeat Resistant To 150 CCorrosion & Chemical Protection
Free delivery in 1–3 days
£9.99
Visit shop

Product Information

Full details

This SolaDirect 400 ml blue spray paint is designed for automotive enthusiasts and DIY mechanics looking to customize the appearance of their vehicle's brake calipers and drums while adding a layer of protective durability. It is an ideal solution for those wanting to achieve a professional-looking aesthetic finish, though it requires meticulous surface preparation and careful masking to ensure long-term performance against heat and chemical exposure.

All features

ColourBlue
Container Volume400 ml
Model Part Number1415557
BrandSolaDirect

Extended Product Information

FAQs

Can I use this on my brake pads?

No, you must never paint friction surfaces such as brake pads, discs, or any braking faces as it will interfere with vehicle safety.

Do I need a primer?

While not strictly required, ensuring the metal surface is perfectly clean and degreased is the most important step for adhesion.

How many cans do I need for four calipers?

One 400 ml can is typically sufficient for all four brake calipers on a standard passenger vehicle.

Is this paint resistant to brake fluid?

Yes, it is formulated to be resistant to chemicals, including brake fluid, once fully cured.

Can I apply this if the temperature is below 18°C?

It is not recommended. Application at lower temperatures can lead to poor adhesion, uneven finishes, and longer drying times.

How long does it take to dry?

Refer to the specific instructions on your product label, as curing times can vary based on humidity and temperature.

Troubleshooting

Paint is running or dripping during application

Apply thinner coats and allow more drying time between passes. Keep the spray nozzle at the recommended distance from the surface.

Paint is flaking or peeling shortly after application

This usually indicates improper surface preparation. Ensure the part was fully degreased and free of loose rust before painting.

The finish is dull or uneven

The application temperature may be too low. Ensure you are working in an environment that is 18°C or higher.

Pros and Cons

Pros

  • Protects against corrosion and chemical damage
  • Easy-to-use aerosol delivery system
  • Withstands temperatures up to 150°C
  • Adds a customized, aesthetic finish to vehicle components

Cons

  • Requires thorough cleaning and degreasing for proper adhesion
  • Sensitive to application temperatures below 18°C
  • Cannot be applied to friction surfaces like pads or discs
  • Demands precise masking of surrounding suspension components

Setup, Compatibility & Care

To achieve the best results, start by removing the wheels to gain full access to the brake assembly. Thoroughly clean the calipers or drums to remove all dirt, grease, and loose rust—using a wire brush and a dedicated brake cleaner is highly recommended. Ensure the surface is completely dry and degreased before starting. Mask off all surrounding areas, specifically avoiding any friction surfaces like brake pads, the braking face of the rotors/discs, and any moving pivot points or rubber seals. Apply the paint in a well-ventilated area when ambient temperatures are at least 18°C. Always refer to the specific drying and curing times listed on the product label before reinstalling your wheels.

Similar items

Price History

DatePrice
Visit shop