Tower XEC20 Plus Corded 3-in-1 Vacuum Cleaner - Blue

The '3-in-1' functionality means it can be used in three ways: as a traditional upright stick vacuum for floors, as a handheld unit for cars and upholstery, and with the extension pole for high-reach cleaning like ceilings and curtains.

For optimal performance, it is recommended to empty the 1-liter dust tank after each major cleaning session, or whenever the dirt reaches the maximum fill line indicated on the tank.

The HEPA 13 filter should be cleaned regularly. Carefully remove the filter according to the user manual. You can usually tap it against a bin to dislodge dust or rinse it under cold running water. Crucially, ensure the filter is completely dry before reinserting it into the vacuum to prevent damage.

Yes, with its powerful cyclonic suction and included brush tool, the Tower XEC20 Plus is effective at picking up pet hair from various surfaces, including carpets and upholstery.

The vacuum features an extra-long 5-meter (approximately 16.4 feet) power cord, providing ample reach for cleaning multiple areas without constantly switching outlets.

Yes, the dual-action floor head is designed to be gentle on hard floors, including delicate wooden surfaces. For very sensitive areas, you can use the brush tool in handheld or extended mode.

Check if the 1-liter dust tank is full and needs emptying. Inspect the HEPA 13 filter for blockages and clean it if necessary. Ensure there are no blockages in the hose, main pole, or floor head.

Verify that the power cord is securely plugged into a working electrical outlet. Check the power switch on the vacuum to ensure it is in the 'on' position. Try plugging another appliance into the same outlet to confirm power supply.

Ensure the dust tank is correctly reattached and sealed after emptying. Check that the HEPA 13 filter is properly installed and not damaged. Avoid overfilling the dust tank.

Turn off and unplug the vacuum. Inspect the brush roll in the floor head for tangled hair, threads, or large debris. Carefully remove any obstructions using scissors or your hands. Ensure the brush roll is free to spin.