Granocryl Smooth Masonry Paint - Sandstone - 5L

Granocryl Masonry Paint is suitable for use on brick, concrete, render, and other exterior masonry surfaces.

For best results, apply two coats of paint, allowing the first coat to dry completely before applying the second.

Clean the surface thoroughly to remove dirt, grease, and loose particles. Repair any cracks or damage and ensure the surface is dry before application.

Drying times vary depending on conditions. Refer to the product label for specific drying times, usually a few hours.

Clean brushes, rollers, and other tools with water immediately after use.

Coverage depends on the surface and application method. Check the product label for coverage information.

Avoid applying the paint in extreme weather conditions (very hot, cold, or humid). Refer to the product label for the recommended application conditions.

Ensure the surface was properly prepared. Remove loose paint, sand the surface, and reapply.

Apply a second coat of paint. Ensure proper application technique, avoiding excessive spreading.

Ensure adequate ventilation. Check the temperature and humidity levels; avoid painting in extreme conditions.

Ensure the paint was mixed properly. Verify the color against the product label. Consider the influence of existing surface colors.

Ensure the surface is clean, dry and free of loose particles. Consider using a primer.