Crown Easyclean Bathroom Paint - White

While specifically formulated for bathrooms due to its anti-mould, steam, and condensation resistance, its durable and washable properties make it suitable for other high-traffic or moisture-prone areas like kitchens or utility rooms.

Generally, two coats are recommended for optimal coverage and durability, especially when painting over a contrasting colour. Always refer to specific instructions on the paint can for best results (Info needed: Number of coats).

This paint features a mid-sheen finish, which provides a subtle gloss that is both durable and easy to clean, making it ideal for bathroom environments.

The Crown Easyclean Bathroom Paint utilizes a 'Breatheasy' formulation, making it virtually odour-free during application. It is also certified by the Asthma and Allergy Association, highlighting its low-VOC content and suitability for sensitive individuals.

Thanks to its tough and washable finish, you can easily clean painted surfaces with a soft, damp cloth and mild household detergent. Avoid abrasive cleaners or harsh scrubbing to maintain the finish.

No, you must thoroughly clean and treat any existing mould before painting. Painting over mould will not kill it and it will eventually reappear through the new paint layer. Ensure the surface is completely dry before applying paint.

Ensure the surface was thoroughly cleaned of existing mould before painting. Use a mould-killing solution if necessary. Also, improve bathroom ventilation to reduce humidity, as the paint protects the film but cannot eliminate the source of excessive moisture.

Poor adhesion often results from inadequate surface preparation. Ensure surfaces are perfectly clean, dry, and smooth. Remove all loose paint, dirt, grease, or grime. A primer might be needed for very porous or difficult surfaces (Info needed: Primer recommendations).

Apply the paint in thin, even coats. Avoid overworking the paint or applying too much pressure. Ensure proper drying time between coats (Info needed: Specific recoat times). Use high-quality brushes and rollers suitable for water-based paints.