Dulux Trade Diamond Satinwood - Tinted Colour Match - 1L

No, Dulux Trade Diamond Satinwood is specifically formulated for interior use only and is not suitable for outdoor applications.

For best results and maximum durability, two full coats are recommended. A primer or undercoat may be necessary for significant colour changes or problematic surfaces.

The approximate surface coverage is 12 square meters per litre per coat.

No, because this paint is mixed to order, it cannot be returned or exchanged. Please double-check your colour selection before ordering.

Yes, Dulux Trade Diamond Satinwood has a washable finish, meaning it can be wiped clean without damaging the paint, making it ideal for high-traffic areas.

It is best used on MDF, metal, and wood surfaces and is suitable for various interior rooms including bathrooms, kitchens, hallways, and living areas.

The paint takes approximately 4-6 hours to dry to the touch, with a recoat time of 16-24 hours.

The paint has a medium VOC content (76 g/l), contributing to its low odour profile.

Ensure the surface was properly prepared, clean, dry, and free from dust or grease. For previously painted surfaces, ensure old paint is sound and lightly abraded if necessary.

Apply paint with consistent, even strokes. Use a high-quality brush or roller suitable for water-based paints. Ensure you are not applying too thickly and maintain a wet edge where possible.

Ensure application conditions are within the recommended temperature and humidity range. Avoid applying in very cold or damp environments. Ensure adequate ventilation.

Some tough stains may require a primer or an additional coat of undercoat. Ensure the stain was not visible through the first coat before applying the second.