Best current price£4.99from Homebase
Shopping.co.uk recommended and popular offers
Homebase£4.99Visit shop D-C-Fix Santana Oak Wood Effect Sticky Back Plastic Vinyl Wrap Film 45Cm X 2M
Visit shop
wilko£6.99Visit shop d-c-fix Beech Wood Effect Sticky Back Plastic Vinyl Wrap Film - 67.5cm x 2m - Brown
Visit shop
B&Q£6.99Visit shop - D-C-FixSelf Adhesive FilmMaple45Cm X 2M
Visit shop54 offers from £4.99 - £27.61
View price history by clicking the chart icon.
The D-C-Fix Self Adhesive Film is designed for DIY enthusiasts and homeowners seeking a quick, cost-effective, and stylish way to refresh furniture and surfaces. This brown, artisan oak wood effect film excels at transforming ordinary items into sophisticated pieces, offering an easy application process and a durable finish. Made with German craftsmanship, it provides a sustainable alternative to replacing furniture. Optimal results are achieved on clean, flat, and smooth surfaces.
| Colour | Brown |
|---|---|
| Model Part Number | F3468181 |
| Brand | d-c-fix |
Yes, you can apply D-C-Fix film over painted surfaces, provided the paint is fully cured, smooth, clean, and in good condition. Flaking or uneven paint will affect adhesion and the final finish.
The D-C-Fix Self Adhesive Film is water-resistant, meaning it can withstand splashes and moisture. It is suitable for use in kitchens and bathrooms. However, it is not designed for continuous submersion or areas with standing water.
The film is heat-resistant up to 70°C (158°F). This makes it suitable for most indoor applications, including kitchen surfaces, but it should not be exposed to direct flames or temperatures exceeding this limit.
Cleaning is simple. Just wipe the surface with a damp cloth and a mild household cleaner. Avoid using abrasive sponges, harsh chemicals, or solvents, as these can damage the film's finish.
D-C-Fix film is generally designed to be removable without causing damage to the underlying surface, especially if applied correctly to a sound surface. Gently peel the film back slowly. For easier removal, you can use a hairdryer on a low setting to warm the film, which softens the adhesive.
For optimal application, you will need a measuring tape, a sharp utility knife or scissors, a pencil for marking, and a smoothing tool (squeegee or soft cloth) to eliminate air bubbles.
Lift the film gently back to the point of the bubble/wrinkle and reapply while smoothing firmly with a squeegee from the center outwards. For small, persistent bubbles, a fine needle can be used to puncture them and then smooth down.
Ensure the surface was thoroughly cleaned and dry before application. Residue like dust, grease, or wax will prevent adhesion. If the edges are lifting, apply gentle heat with a hairdryer (on low setting) to soften the adhesive, then press firmly. For stubborn areas, consider using a contact adhesive for edges, if suitable for the surface.
Always use a sharp knife or scissors. A dull blade can cause tearing. When cutting, use a ruler or straight edge to guide your blade for clean, straight lines. Ensure consistent pressure during cutting.
