Best current price£21.57from B&Q
Shopping.co.uk recommended and popular offers
B&Q£21.57Visit shop B&Q - Brick CoatingBrick Effect PaintOrange250Ml
Visit shop
Amazon£23.87Visit shop StoneLux® Brick Coating - Textured Brick Effect Paint for Changing and Restoring Brickwork Orange 250ml
Visit shop5 offers from £21.57 - £320.32
View price history by clicking the chart icon.
The Stonelux Brick Coating in Orange is designed for homeowners and professionals looking to refresh and unify the appearance of brickwork. It effectively conceals imperfections and revitalizes masonry for a lasting, visually appealing finish. A key benefit is its ability to provide an authentic brick look while allowing the masonry to breathe. However, achieving an even color may require careful application on highly porous surfaces.
| Colour | Orange |
|---|---|
| Brand | Stonelux |
Coverage varies depending on the porosity of the surface and the application method. Refer to the product's technical data sheet or packaging for specific coverage estimates per liter or gallon.
Yes, once fully cured, the coating can be painted over with a suitable masonry paint. However, it's always advisable to test compatibility first.
While designed for exterior masonry, it can be used on interior brick walls. Ensure good ventilation during application and drying, as with any paint product.
The Stonelux Brick Coating is formulated for durability and is designed to withstand the elements for many years when applied correctly to a properly prepared surface.
It is suitable for masonry surfaces. However, for areas exposed to extreme heat or direct flame, specific heat-resistant coatings may be required. Consult the manufacturer's guidelines for high-temperature applications.
Stonelux Brick Coating is a durable paint that alters the color and finish of bricks, providing a uniform look. Brick wash is typically a cleaning solution used to remove efflorescence or stains without changing the brick's color.
Ensure the coating is thoroughly stirred before and during application. Apply in consistent, overlapping strokes. If necessary, apply a second coat after the first has fully dried, paying attention to coverage.
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from dust, grease, or previous flaking paint. For non-porous surfaces, a suitable primer might be required.
This can indicate insufficient drying time between coats or application in unfavorable weather conditions (e.g., extreme temperatures, high humidity). Ensure recommended drying times and environmental conditions are met for future applications.
Experiment with different application tools or techniques. A spray application may provide a smoother finish if desired. Ensure the coating is applied at the recommended consistency.
Setup: Ensure the surface is clean, dry, and free from loose debris, mold, or efflorescence. Minor repairs should be completed before application. Stir the product thoroughly before use.
Compatibility: Suitable for most porous and non-porous masonry surfaces. Test on an inconspicuous area first, especially on pre-painted or sealed surfaces, to ensure adhesion. Not recommended for use on damp walls or surfaces prone to hydrostatic pressure.
Application: Apply using a brush, roller, or spray gun. Use even strokes to ensure consistent coverage. For a more textured, brick-like finish, a slightly thicker application might be preferred. Allow the first coat to dry before applying a second coat if needed for full opacity or to achieve the desired look.
Care: Clean application tools immediately after use with water. Once dry, the coating is durable and requires minimal maintenance. For cleaning the coated surface, use a soft brush and water. Avoid abrasive cleaners or high-pressure washing.
