Best current price£23.87from Amazon
Shopping.co.uk recommended and popular offers
Amazon£23.87Visit shop StoneLux® Brick Coating - Textured Brick Effect Paint for Changing and Restoring Brickwork Medium Beige 250ml
Visit shop2 offers from £23.87
View price history by clicking the chart icon.
The Stonelux Brick Coating in Beige is ideal for homeowners and professionals looking to refresh or unify the appearance of brickwork. Its primary benefit is its ability to seamlessly conceal imperfections and provide a durable, long-lasting, authentic brick finish. A minor consideration is ensuring proper surface preparation for optimal adhesion and longevity.
| Colour | Beige |
|---|---|
| Brand | StoneLux |
Yes, as long as the existing paint is sound, well-adhered, and clean. For best results, light abrasion may improve adhesion.
Generally, two thin, even coats are recommended for optimal coverage and durability. However, this can vary depending on the surface porosity and desired finish.
Stonelux Brick Coating is quick-drying. Specific times for touch dry and recoating will be detailed in the manufacturer's instructions, but typically allow at least a few hours between coats.
While designed for masonry, its breathable properties make it suitable for interior use where a brick effect is desired. Ensure good ventilation during application.
Mixing colors is possible to achieve custom shades, but it's recommended to test small batches first to ensure the desired outcome. Stir thoroughly after mixing.
The finished surface can be cleaned using a soft brush or cloth with mild soap and water. Avoid using high-pressure washers or abrasive cleaning agents.
It provides a durable coating but is formulated to be breathable, allowing moisture vapor to escape. It is not a completely impermeable sealant.
Ensure the brick surface was properly cleaned, dry, and free from dust or contaminants before application. Check if a primer was required for the specific surface type.
Ensure the product was thoroughly stirred before and during application. Apply in thin, even coats, avoiding lap marks. Allow sufficient drying time between coats.
Apply an additional thin coat, ensuring full coverage. For significant structural damage, repairs may be needed prior to coating.
This can indicate insufficient film formation. Ensure all manufacturer's application instructions, including recoat times and temperature, were followed.
Setup: Ensure the brick surface is clean, dry, and free from loose render, paint, or efflorescence. Remove any moss or algae. Apply a suitable primer if necessary, especially on very porous surfaces. Stir the coating thoroughly before application.
Compatibility: Suitable for both porous and non-porous masonry surfaces. It can be applied over existing paint if it is sound and well-adhered.
Application: Apply using a brush, roller, or spray in thin, even coats. Avoid over-application. Allow adequate drying time between coats as per manufacturer instructions.
Care: Clean applied surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
