Rustins Wood Dye - Red Mahogany

No, this wood dye is specifically for use on *bare wood* or wood that has been completely stripped back to its natural state.

You can intermix the Red Mahogany dye with other Rustins Wood Dye shades, such as Brown Mahogany or Dark Oak, to create an infinite variety of natural wood shades. Always test your mix on a spare piece of wood first.

You can apply any of Rustins' wood finishes over the dye, including varnishes, lacquers, or oils, once the dye is completely dry.

Yes, Rustins Wood Dye is suitable for both interior and exterior use and is non-fading.

The dye is fast-drying. Specific drying times can vary based on temperature and humidity, but it is typically ready for a second coat or a topcoat within a short period.

While specific odor information is not detailed, wood dyes typically have a mild solvent smell. Ensure adequate ventilation during application and drying.

Apply evenly with a good quality brush or a clean, lint-free cloth, working in the direction of the wood grain. Avoid leaving brush marks or puddles.

Ensure the wood is properly prepared and free from contaminants. Apply the dye evenly with a brush or cloth, working in the direction of the grain. Avoid over-applying in one spot.

Allow the first coat to dry completely and apply a second coat. For deeper shades, multiple thin coats are more effective than one thick coat.

It is difficult to lighten the wood once dyed. Always test the color on a spare piece of wood or an inconspicuous area first. If too dark, consider mixing with a lighter shade in future applications.

Rustins Wood Dye is formulated not to raise the grain. If this occurs, it may be due to the wood type or prior preparation. Lightly sand with very fine grit sandpaper after drying, and reapply dye if necessary.