DPA Adapter - MicroLock to TA4F Mini-XLR

This adapter is designed for DPA headset, lavalier, and instrument microphones that feature the original DPA MicroLock connector.

The adapter is compatible with wireless transmitters that have a TA4F Switchcraft mini-XLR input, commonly found on Shure, TOA, PGX1, and Line 6 models.

No, this adapter is passive and does not require phantom power. The microphone itself receives power from the wireless transmitter.

The adapter is designed to maintain the high audio fidelity of DPA microphones, ensuring minimal signal degradation. You should experience the same sound quality as if connecting directly to a compatible DPA system.

The primary difference is that this version has an original DPA MicroLock connector, allowing you to detach the microphone from the adapter. The fixed connector version has the connector permanently attached to the cable.

No, this adapter is specifically designed to bridge DPA's MicroLock system to the TA4F mini-XLR. It will not work with other microphone connectors or types.

Verify that both the DPA microphone and the wireless transmitter are powered on. Check that the adapter is securely connected at both ends. Ensure the transmitter and receiver are properly paired and on the correct channels. Test with a different microphone or transmitter if possible.

Check the gain settings on your wireless transmitter and the connected audio system. Ensure the DPA microphone is positioned correctly and not clipping the capsule. Inspect the adapter's connectors for any debris or damage that might affect signal integrity.

Gently inspect the TA4F connector on the adapter and the corresponding port on the transmitter for any visible damage or bent pins. If the connection feels excessively loose, it may indicate wear and the adapter might need replacement.