Best current price£9.70from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.70Visit shop Motor Control Board Assembly For 21V Brushless Lithium-Ion Drill Motors, 13-Tooth Brushless Drills. 4712089718344
Visit shop
Merlin Cycles£44.99Visit shop Token Silver Ninja Bottom Bracket Bb386 For Shimano 24Mm - / Bb386
Visit shop2 offers from £9.70 - £44.99
View price history by clicking the chart icon.
The Token Ninja Thread Fit Bottom Bracket is designed for performance-minded cyclists using BB386 frames who want to upgrade to a Shimano 24mm crankset without the common frustrations of standard press-fit systems. Its primary benefit is the elimination of drivetrain creaking and improved structural rigidity through a proprietary threaded internal locking mechanism. While it offers superior stability and durability compared to traditional press-fit units, note that installation requires specific bottom bracket tools to ensure the two halves are threaded together correctly within the frame shell.
| Model Part Number | TF38624 |
|---|---|
| Brand | Token |
No, this is specifically designed for BB386 and BB392 press-fit shells, not frames with threaded BSA shells.
No, this specific model is designed for Shimano 24mm axle chainsets.
Yes, it requires a standard bottom bracket tool compatible with the specific cup notches to thread the two halves together.
It is compatible with any frame using the BB386 or BB392 shell standard, regardless of whether it is a road or mountain bike.
It is not required, but a light application of bicycle-specific grease on the threads is recommended to prevent seizing and ensure smooth assembly.
Ensure the bottom bracket halves are tightened sufficiently and the frame shell was completely cleaned of old residue before installation.
Check for cross-threading. If the cups do not thread easily by hand, back them out and realign them to avoid damaging the alloy threads.
Verify that the crankset spacers are installed correctly and that the bottom bracket is not being over-tightened, which can compress the bearings.
To install the Token Ninja, ensure your bottom bracket shell is clean and free of debris. Apply a light layer of grease to the threads of the inner cups. Insert one side of the bracket into the frame, then thread the opposite side into it by hand to ensure the threads catch properly. Using the appropriate bottom bracket tool, tighten both sides until they are firmly seated. Do not over-torque, as this may bind the bearings. For ongoing care, avoid using high-pressure water spray directly at the crank-to-frame interface, as this can force contaminants past the seals and into the bearings. Periodic inspection of the crankset for play is recommended to ensure the unit remains secure.
Sony Distagon T* FE 35mm F1.4 ZA LensFrom £849
Sony Full-Frame E-Mount Mid-Range Zoom Lens - 24-70mm f/4From £465
Token Ninja Thread Fit Bottom Bracket - Trek BB90/BB95 to Shimano 24mmFrom £45
Draper 7-Pin N-Type Towing Plug - 99668From £3
Nikon Nikkor Z 35mm f/1.8 S Lens - NikonFrom £560
Sony FE 35mm F1.8From £394
FloPlast Ring Seal Soil Pipe Single Socket - 110mm x 3m - Anthracite GreyFrom £24
Viva Extended Straight WC Connector - 265mm - White PolypropyleneFrom £8
Nikon 200-400mm f4 G VR II AF-S ED LensFrom £7599
FloPlast Ring Seal Soil Grey Single Socket Soil Pipe - 110mm x 3mtrFrom £24
Panasonic Lumix S 35mm F1.8 Lens - PanasonicFrom £529
Tamron 150-500mm F/5-6.7 Di III VC VXD Lens - Fujifilm X-MountFrom £985